In line with GSCCR- 79 and GSCCR-80, the following new TC sequences have been
included in the updated ED database which was put on the FTP server on
Friday:

K/LEDATA02: New versions of Data Taking EDs, to be used instead of
K/LEDATA01. This new ED also sets the value of the SW Trigger Limit via the
formal parameter K/L0014F. Note that:
1) The value of the formal parameter K/L0014F should be specified in RAW DEC.
2) The duration of this ED has increased from 25 seconds to 45 seconds. There
should be no impact of this on the scheduling and execution of these EDs
during slews.

K/LEHVAC01: New versions of the EDs to activate the JEM-X HV and configure
the instrument for science operations (Data Taking). In these EDs, the final
nominal HV is set in one step. Note that:
   The duration of these EDs is 14minutes45seconds (instead of
   33minutes45seconds as in the case of the K/LEACT_03 EDs). Therefore, the
   position of the JEM-X1/2_START keywords will be changed to be 16 minutes
   and the default scheduling of these EDs in the POS should be changed to
   JEM-X1/2_START minus 16 minutes.
   The K/LEACT_03 EDs have been maintained in the IODB in case that it is
   desired later to go back to the current activation strategy. However, it
   should be ensured that these EDs are no longer scheduled in the POS.